View PLRXPL-VE-SG4-38_4408270.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

COMMUNICATIONS MODULES & SUBSYSTEMS
RoHS-Compliant 4.25 Gbps 850 nm eSFP Transceivers; Extended/Industrial Temperature & Voltage PLRXPL-VE-SG4-38 and PLRXPL-VI-SG4-38
Key Features
* Compliant with industry-wide physical and optical specifications * Lead-free and RoHS-compliant * Cost effective SFP solution * FC/Ethernet performance * Enables higher port densities * Enables greater bandwidth * Proven high reliability
Applications
* High-speed storage area networks - Switch and hub interconnect - Mass storage systems interconnect - Host adapter interconnect * Computer cluster cross-connect * Custom high-speed data pipes * Short Reach Ethernet
This lead-free and RoHS-compliant multi-rate Small Form Factor Pluggable (SFP) transceiver provides superior performance for Fibre Channel applications, and is another in the JDSU family of products customized for high speed, shortreach SAN, and intra-POP applications. The multi-rate feature enables its use in a wider range of system applications. It is Electro-Optically compliant with FC-PI 100-M5/M6-SN-I, 200-M5/M6-SN-I, 400-M5/M6-SN-I and 1000Base-SX specifications. The rate select pin (pin 7) along with the software rate select bit provide receiver bandwidth switching between 4.25G /2.125G and 2.125/1.0625G line rates for optmized link performance enabling hardware or software based rate-negotiation system architectures. JDSU's improved housing provides superior EMI performance for demanding 4GFC applications. This transceiver features a highly reliable 850 nm oxide vertical-cavity surface-emitting laser (VCSEL) coupled to a LC optical connector. Its small size allows for high-density board designs that, in turn, enable greater total aggregate bandwidth.
Highlights
* 4GFC, 2GFC, and 1GFC and 1GBE multiple rate performance enables flexible system design, and configuration, while maximizing bandwidth * Lead-free and RoHS-compliant per Directive 2002/95/EC * Enhanced digital diagnostic feature set allows real-time monitoring of transceiver performance and system stability. * Bail mechanism enables superior ergonomics and functionality in all port configurations * Extended/Industrial voltage and extended temperature * MSA-compliant small form factor footprint enables high port density and keeps overall system cost low * Serial ID allows customer and vendor system specific information to be placed in transceiver * All-metal housing provides superior EMI performance
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
2
Features
* Uses a JDSU high-reliability, highspeed, 850 nm, oxide VCSEL * Lead-free and RoHS-compliant * Hot pluggable * Digital diagnostics, SFF-8472 rev 9.5 compliant * Compliant with Fibre Channel 400-M5/M6-SN-1, 200-M5/M6-SN-I, 100-M5/M6-SN-I and 1000Base-SX * Selectable 4G/2G/1G receiver bandwidth with rate select pin 7 or through digital diagnostics interface * Low nominal power consumption (< 400 mW) * -20C to 85C operating temperature range for PLRXPL-VE-SG4-38 * -40C to 85C operating temperature range for PLRXPL-VI-SG4-38 * Single +3.3 V power supply * 10% extended operating voltage range * Bit error rate < 1 x 10-12 * OC transmit disable, loss of signal and transmitter fault functions * CDRH and IEC 60825-1 Class 1 laser eye safe * FCC Class B compliant * ESD Class 2 per MIL-STD 883 Method 3015 * UL-94 V-0 certified * Internal AC coupling on both transmit and receive data signals
An eye-safe, cost effective serial transceiver, the PLRXPL-VE-SG4-38 and PLRXPL-VISG4-38 feature a small, low power, pluggable package that manufacturers can upgrade in the field, adding bandwidth incrementally. The robust mechanical design features a unique all-metal housing that provides superior EMI shielding.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
3 Section 1 Functional Description
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 850 nm VCSEL Gigabit Transceiver is designed to transmit and receive 8B/10B encoded serial optical data over 50/125 m or 62.5/125 m multimode optical fiber. This transceiver is lead-free and RoHS-compliant per Directive 2002/95/EC.
Transmitter
The transmitter converts 8B/10B encoded serial PECL or CML electrical data into serial optical data meeting the requirements of 100-M5/M6-SN-I, 200-M5/M6-SN-I, 400-M5/M6-SN-I Fibre Channel and 1000Base-SX Ethernet specifications. Transmit data lines (TD+ & TD-) are internally AC coupled with 100 differential termination. An open collector compatible Transmit Disable (Tx_Dis) is provided. This pin is internally terminated with a 10 k resistor to VccT. A logic "1," or no connection on this pin will disable the laser from transmitting. A logic "0" on this pin provides normal operation. The transmitter has an internal PIN monitor diode that is used to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. The Transmit Fault signal must be pulled high on the host board for proper operation. A logic "1" output from this pin indicates that a transmitter fault has occurred, or the part is not fully seated and the transmitter is disabled. A logic "0" on this pin indicates normal operation. The extinction ratio of the transmitter is automatically increased to meet the requirements of 1000BASE-SX Ethernet specifications when the Rate Select pin and software bit are set to "low".
Receiver
The receiver converts 8B/10B encoded serial optical data into serial PECL/CML electrical data. Receive data lines (RD+ and RD-) are internally AC coupled with 100 differential source impedance, and must be terminated with a 100 differential load. Rate select, pin 7, switches the receiver bandwith enabling superior performance at 4.25 Gbps, 2.125 Gbps, and 1.0625 Gbps line rates. When rate-select is set "high" (4.25/2.125 Gbps mode) the receiver bandwidth is not compliant to the maximum receiver bandwidth specified under 100-M5/M6-SN-I.
Table 1 FC Compliance with Rate Select
Parameter High Low
1. Not compliant to receiver bandwidth 2. Also 1000Base-SX compliant
100-M5/M6-SN-I No1 Yes2
200-M5/M6-SN-I Yes Yes
400-M5/M6-SN-I Yes No1
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
4
An open collector compatible Loss of Signal is provided. The LOS must be pulled high on the host board for proper operation. A logic "0" indicates that light has been detected at the input to the receiver (see Section 2.5 Optical characteristic, Loss of Signal Assert/Deassert Time on page 9). A logic "1" output indicates that insufficient light has been detected for proper operation. Power supply filtering is recommended for both the transmitter and receiver. Filtering should be placed on the host assembly as close to the Vcc pins as possible for optimal performance. Recommended "Application Schematics" are shown in Figure 2 on page 5.
16 Transmitter Power Supply
10K
3 Transmitter Disable In Vcc_T Vcc_T TDis TD+ 18 Transmitter Positive Data In
50
TOSA
Laser Driver
50
TDT_Gnd T_Fault 19 Transmitter Negative Data In 2 Transmitter Fault Out 1, 17, 20 Transmitter Signal Ground
Management SCL Processor EEPROM
5 MOD_DEF(1) Serial ID Clock 4 MOD_DEF(2) Serial ID Data 6 MOD_DEF(0) 15 Receiver Power Supply
SDA
Vcc_R
Vcc_R RD-
50
ROSA
R_Gnd
RECEIVER
50
RD+ R_Gnd LOS
12 Receiver Negative Data Out 13 Receiver Positive Data Out 7 Rate Select
30 k
8 Loss of Signal Out 9, 10, 11, 14 Receiver Signal Ground
Figure 1
Block diagram
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
5 Section 2 Application Schematics
Recommended connections to the PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 transceiver are shown in Figure 2 below.
10K
Receiver (Tx Fault) Open Collector Driver (Tx Disable)
R1 * 50 Z = 100
*
PECL Driver (TX DATA)
SFP Host Connector
10K 1 VeeT 2 Tx Fault 10K 3 Tx Disable 4 MOD_DEF(2) 5 MOD_DEF(1) 10K 6 MOD_DEF(0) 7 Rate select 8 LOS 9 VeeR VeeT 20 TD- 19 TD+ 18 VeeT 17 VccT 16 VccR 15 VeeR 14 RD+ 13 RD- 12 VeeR 11 C4
Open Collector Bidirectional {Mod_Def(2)}
R2 * 50
C3 0.1 F L1 1H C2 L2 1H C5 10 u F 0.1 F C1 10 F +3.3V Vcc Input
Open Collector Bidirectional {Mod_Def(1)}
Receiver {Mod_Def(0)}
0.1uF
Receiver and Transmitter Rate Select
10 VeeR
10K
Receiver (LOS)
Z = 100
*
R3 50
*
PECL Receiver (RX DATA)
R4 * 50
Notes Power supply filtering components should be placed as close to the Vcc pins of the host connector as possible for optimal performance. PECL driver and receiver will require biasing networks. Please consult application notes from suppliers of these components. CML I/O on the PHY are supported. MOD_DEF(2) and MOD_DEF(1) should be bi-directional open collector connections in order to implement serial ID (MOD_DEF[0,1,1]) PLRXPL-VE-SG4-38 transceiver. R1 and R2 may be included in the output of the PHY. Check application notes of the IC in use. * Transmission lines should be 100 differential traces. It is recommended that the termination resistor for the PECL Receiver (R3 + R4) be placed beyond the input pins of the PECL Receiver. Series Source Termination Resistors on the PECL Driver (R1+R2) should be placed as close to the driver output pins as possible
Figure 2
Recommended application schematic for the PLRXPL-VE-SG4-38/ PLRXPL-VI-SG4-38 transceiver
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
6
2.1
Technical data
Technical data related to the RoHS-Compliant 4.25 Gbps 850 nm eSFP Transceivers; Extended/Industrial Temperature and Voltage includes: * Section 2.2 Pin function definitions below * Section 2.3 Absolute maximum ratings on page 8 * Section 2.4 Electrical characteristics on page 8 * Section 2.5 Optical characteristic on page 9 * Section 2.6 Link length on page 11 * Section 2.7 Regulatory compliance on page 12 * Section 2.8 PCB layout on page 13 * Section 2.9 Front panel opening on page 14 * Section 2.10 Module outline on page 14 * Section 2.11 Transceiver belly-to-belly mounting on page 15
2.2
Pin function defi nitions
VeeT 1 2 3 4 VeeT TDTXFault TD+ TX Disable VeeT MOD-DEF(2) VccT
20 19 18 17 16 15 14 13 12 11
Towards Bezel
5 6 7 8 9 10
MOD-DEF(1) VccR MOD-DEF(0) VeeR Rate Select RD+ LOS RDVeeR VeeR VeeR
Towards ASIC
Figure 3
Transceiver pin descriptions
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
7
Table 2 Transceiver pin descriptions
Pin Number Receiver 8
Symbol
Name
Description
LOS
Loss of Signal Out (OC)
9, 10, 11, 14 12
VeeR RD-
Receiver Signal Ground Receiver Negative DATA Out (PECL) Receiver Positive DATA Out (PECL) Receiver Power Supply
13
RD+
15
VccR
7
Rate
Rate Select (LVTTL)
Sufficient optical signal for potential BER < 1x10-12 = Logic "0" Insufficient optical signal for potential BER < 1x10-12 = Logic "1" This pin is open collector compatible, and should be pulled up to Host Vcc with a 10 k resistor. These pins should be connected to signal ground on the host board. Light on = Logic "0" Output Receiver DATA output is internally AC coupled and series terminated with a 50 resistor. Light on = Logic "1" Output Receiver DATA output is internally AC coupled and series terminated with a 50 resistor. This pin should be connected to a filtered +3.3V power supply on the host board. See Application schematics on page 5 for filtering suggestions. This pin should be connected to the auto-negotiation rate select function Logic "1" = 4.25Gbps/2.125Gbps receiver bandwidth optimization Logic "0" = 2.125Gbps/1.25Gbps receiver bandwidth optimization and Transmitter Extinction Ratio settings meets the requirements of 1000Base-SX Ethernet Standards Logic "1" Input (or no connection) = Laser off Logic "0" Input = Laser on This pin is internally pulled up to VccT with a 10 k resistor. These pins should be connected to signal ground on the host board. Logic "1" Output = Laser Fault (Laser off before t_fault) Logic "0" Output = Normal Operation This pin is open collector compatible, and should be pulled up to Host Vcc with a 10 k resistor. This pin should be connected to a filtered +3.3V power supply on the host board. See Application schematics on page 5 for filtering suggestions. Logic "1" Input = Light on Transmitter DATA inputs are internally AC coupled and terminated with a differential 100 resistor. Logic "0" Input = Light on Transmitter DATA inputs are internally AC coupled and terminated with a differential 100 resistor. Serial ID with SFF 8472 Diagnostics (See section 3.1) Module Definition pins should be pulled up to Host Vcc with 10 k resistors.
Transmitter 3
TX Disable
Transmitter Disable In (LVTTL)
1, 17, 20 2
VeeT TX Fault
Transmitter Signal Ground Transmitter Fault Out (OC)
16
VccT
Transmitter Power Supply
18
TD+
Transmitter Positive DATA In (PECL) Transmitter Negative DATA In (PECL)
19
TD-
Module Definition 6, 5, 4 MOD_DEF(0:2)
Module Definition Identifiers
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
8
2.3 Absolute maximum ratings
Parameter Storage temperature Operating case temperature PLRXPL-VE-SG4-38 PLRXPL-VI-SG4-38 Power supply voltage Transmitter differential input voltage Relative humidity
Symbol Tst Tc Tc Vcc VD RH
Ratings -40 to +95 -20 to +85 -40 to +85 0 to +4.0 2.5 5 to 95
Unit C C C V VP-P %
2.4
Electrical characteristics
Parameter Supply voltage Data rate Transmitter Supply current Data input voltage swing Data input rise/fall time Data input rise/fall time Data input rise/fall time Data input skew Data input deterministic jitter Data input deterministic jitter Data input deterministic jitter Data input deterministic jitter Data input total jitter Data input total jitter Data input total jitter Data input total jitter Transmit disable voltage level
Symbol Vcc
Min 2.97 1.0
Typical 3.3 2.125 40 800
Max 3.63 4.25 70 2200 80 175 350 20 0.12 0.1 0.14 0.14 0.24 0.25 0.26 0.26
Unit V Gbps mA mVp-p ps ps ps ps UI UI UI
Notes 1
BER < 1x10-12
ICCT VTDp-p
250 40 40 40
Differential, peak to peak 20% - 80%, differential 4 GBd operation 3 20% - 80%, differential 2 GBd operation 3 20% - 80%, differential 1 GBd operation only 3 K28.5 pattern, T, @ 1.062 Gbps 1, 5 K28.5 pattern, TP1, @ 1.25 Gbps 1, 5 K28.5 pattern, T, @ 2.125 Gbps 1, 5 K28.5 pattern, T, @ 4.25 Gbps 1, 5 27-1 pattern, TP1, BER < 1x10-12, @ 1.25 Gbps 1, 5 27-1 pattern, T, BER < 1x10-12, @ 1.062 Gbps 1, 5 27-1 pattern, T, BER < 1x10-12, @ 2.125Gbps 1, 5 27-1 pattern, T, BER < 1x10-12, @ 4.25 Gbps 1, 5 Laser output disabled after TTD if input level is VIH; laser output enabled after TTEN if input level is VIL Laser output disabled after TTD if input level is VIH; laser output enabled after TTEN if input level is VIL Transmit fault level is VOH and Laser output disabled TFault after laser fault. Transmitter fault is VOL and Laser output restored TINI after transmitter disable is asserted for TReset, then disabled. After hot plug or Vcc 2.97V
DJ DJ DJ DJ TJ TJ TJ TJ VIH VIL TTD TTEN VOH VOL TFault TReset TINI Vcc -0.5 0 10 Vcc -1.0 0
UI UI UI V V s ms V V s s ms
Vcc 0.8 10 1 Vcc 0.5 100
Transmit disable/enable assert time
Transmit fault output voltage level Transmit fault assert and reset times Initialization time
300
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
9
2.4 Electrical characteristics
(continued)
Parameter Receiver Supply current Data output voltage swing Data output rise/fall time Data output skew Data output deterministic jitter Data output deterministic jitter Data output deterministic jitter Data output deterministic jitter Total jitter Total jitter Total jitter Total jitter Loss of signal voltage level
Symbol
Min
Typical
Max
Unit
Notes 1
ICCR 600
80 80
DJ DJ DJ DJ TJ TJ TJ TJ VOH VOL Vcc -0.5 0
120 1300 120 40 0.46 0.36 0.39 0.39 0.75 0.61 0.64 0.64 Vcc 0.5 100 100
mA mVp-p ps ps UI UI UI UI UI UI UI UI V V s s
Loss of signal assert/deassert time
TLOSA TLOSD
RLOAD = 100 , differential 20% - 80%, differential RLOAD = 100 , differential K28.5 pattern, TP4, @ 1.25 Gbps 1, 5 K28.5 pattern, R, @ 1.062 Gbps 1, 5 K28.5 pattern, R, @ 2.125 Gbps 1, 5 K28.5 pattern, R, @ 4.25 Gbps 1, 5 27-1 pattern, TP4, BER < 1x10-12 @ 1.25 Gbps 1, 5 27-1 pattern, R , BER < 1x10-12 @ 1.062 Gbps 1, 5 27-1 pattern, R , BER < 1x10-12 @ 2.125 Gbps 1, 5 27-1 pattern, R , BER < 1x10-12 @ 4.25 Gbps 1, 5 LOS output level VOL TLOSD after light input > LOSD 2 LOS output level VOH TLOSA after light input < LOSA 2 LOS output level VOL TLOSD after light input > LOSD 2 LOS output level VOH TLOSA after light input < LOSA 2
1. See Specification notes on page 11 for referenced notes.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
10
2.5 Optical characteristics
Parameter Transmitter Wavelength RMS spectral width Average optical power Extinction ratio Optical output rise/fall time Optical modulation amplitude Deterministic jitter Deterministic jitter Deterministic jitter Deterministic jitter Total jitter Total jitter Total jitter Total jitter Relative intensity noise Receiver Wavelength Maximum input power Sensitivity (OMA)
Symbol lp Dl PAVG ER trise/fall OMA DJ DJ DJ DJ TJ TJ TJ TJ RIN12(OMA) l Pm S1 S2 S4 ISI = 0.96 dB ISI = 2.18 dB ISI = 2.2 dB ISI = 2.6 dB ISI = 1.26 dB ISI = 2.03 dB ISI = 1.67 dB ISI = 2.14 dB LOSD LOSA FC
Min
Typical
Max
Unit
Notes 1
840 -9 9 250
850 0.5
860 0.85 -2.5 90 1125 0.20 0.21 0.26 0.26 0.43 0.43 0.44 0.44 -118 860 31
-125 770 0 850 18
nm nm dBm dB ps W UI UI UI UI UI UI UI UI dB/Hz nm dBm Wp-p
@ in low bandwidth setting on Rate Select 20% - 80% K28.5 pattern, TP2, @ 1.25 Gbps K28.5 pattern, T , @ 1.062 Gbps 1, 5 K28.5 pattern, T , @ 2.125 Gbps 1, 5 K28.5 pattern, T , @ 4.25 Gbps 1, 5 27-1 pattern, TP2, @ 1.25 Gbps 27-1 pattern, T, @ 1.062 Gbps 27-1 pattern, T, @ 2.125 Gbps 1, 5 27-1 pattern, T, @ 4.25 Gbps 1, 5 12 dB reflection
25 55 67 69 87 96 109 138 148
49 61
Stressed Sensitivity (OMA) SS1 Stressed Sensitivity (OMA) SS1 Stressed Sensitivity (OMA) SS2 Stressed Sensitivity (OMA) SS4 Loss of signal assert/deassert level Low frequency cutoff
-17 -30 0.2 0.3
Wp-p Wp-p Wp-p Wp-p Wp-p Wp-p Wp-p Wp-p Wp-p Wp-p dBm dBm MHz
1.06 and 1.25Gbps operation, maximum is equivalent to -17dBm @9dB ER 2.125 Gbps operation 4.25 Gbps operation 1.06G operation 1.06G operation 1.25Gbps operation 1.25Gbps operation 2.125G operation 2.125G operation 4.25G operation 4.25G operation Chatter free operation -3 dB, P<-16 dBm
1. See Specification notes on page 11 for referenced notes.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
11
2.6 Link length
Data Rate / Standard 1.0625 GBd Fibre Channel 100-M5-SN-I 100-M6-SN-I 1.25 Gbps IEEE 802.3 1000Base-SX
Fiber Type 62.5/125 mm MMF 50/125 mm MMF 50/125 mm MMF 50/125 mm MMF 50/125 mm MMF 62.5/125 mm MMF 50/125 mm MMF 50/125 mm MMF 50/125 mm MMF 50/125 mm MMF 62.5/125 mm MMF 50/125 mm MMF 50/125 mm MMF 50/125 mm MMF 50/125 mm MMF 62.5/125 mm MMF 50/125 mm MMF 50/125 mm MMF 50/125 mm MMF 50/125 mm MMF
Modal Bandwidth @ 850 nm (MHz*km) 200 500 900 1500 2000 200 500 900 1500 2000 200 500 900 1500 2000 200 500 900 1500 2000
Distance Range (m) 2 to 300 2 to 500 2 to 630 2 to 755 2 to 860 .5 to 275 .5 to 550 .5 to 595 .5 to 740 .5 to 860 2 to 150 2 to 300 2 to 350 2 to 430 2 to 500 2 to 70 2 to 150 2 to 175 2 to 215 2 to 270
Notes 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
2.125 GBd Fibre Channel 200-M5-SN-I, 200-M6-SN-I 4.25 GBd Fibre Channel 200-M5-SN-I, 200-M6-SN-I
Specification notes 1. UI (Unit Interval): one UI is equal to one bit time. For example, 2.125 Gbps corresponds to a UI of 470.588ps. 2. For LOSA and LOSD definitions see Loss of Signal Assert/Deassert Level in Section 2.5 Optical characteristics on page 10. 3. When operating the transceiver at 1.0 - 1.3 Gbaud only, a slower input rise and fall time is acceptable. If it is planned to operate the module in the 1.0 - 4.25 Gbaud range, faster input rise and fall times are required. 4. Measured with stressed eye pattern as per FC-PI (Fibre Channel) using the worst case specifications. 5. All jitter measurements performed with worst case input jitter according to FC-PI. 6. Distances, shown in the "Link Length" table, are the distances specified in the Fibre Channel and Ethernet standards. "Link Length" distances are calculated for worst case fiber and transceiver characteristics based on the optical and electrical specifications shown in this document using techniques utilized in IEEE 802.3 (Gigabit Ethernet). In the nominal case, longer distances are achievable.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
12
2.7 Regulatory compliance
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 complies with common ESD, EMI, Immunity, and Component recognition requirements and specification (see details in Table 3 on page 12). The PLRXPL-VE-SG4-38/PLRXPL-VE-SG4-38 is lead-free and RoHS-compliant per Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. ESD, EMI, and Immunity are dependent on the overall system design. Information included herein is intended as a figure of merit for designers to use as a basis for design decisions.
Table 3 Regulatory compliance
Feature Laser eye safety
Test Method U.S. 21CFR (J) 1040.10 & 1040.11 IEC 60825 MIL-STD 883; Method 3015.7 EN 61000-4-2 IEC 61000-4-2: 1999
Performance CDRH compliant and Class 1 laser safe. Accession # 9922782 TUV Certificate # U8V051038649039 Class 1 (> 1 kV) Withstand discharges of 15 kV using a "Human Body Model" probe Contact: 8kV Air: 25kV Noise frequency range: 30 MHz to 22 GHz. Good system EMI design practice achieve Class B margins.
Electrostatic discharge (ESD) immunity at electrical pins Electrostatic discharge (ESD) immunity at optical connector
Electromagnetic interference (EMI)
Radiated immunity
FCC CFR 47 Part 15 Subpart J Class B CISPR 22: 2002 EN 55022: 1998 +A1:2000 VCCI Class I +A1:2003 IEC 61000-4-3
Lead-free and RoHS-compliant
Directive 2002/95/EC
UL TUV
UL 60950-1:2003 EN 60950-1/A11:2004 EN 60825-//A1:2002 CAN/CSA C22:2 NO 60950-1:2003
Field strength of 3 V/m RMS, from 80 MHz to 1.0 GHz. No effect on transceiver performance is detectable between these limits. Compliant per the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment UL File #E209897 TUV Certificate # U8V051038649039 CB Certificate# DE3-52702M1
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
13
2.8 PCB layout
34.50 2X 30 A
CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEPOUT (EXCEPT CHASSIS GROUND)
NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER.
20 3X 10 2X 7.20 2X 2.50 2X 2.50 3X 7.10 0.850.05 2 (MARKED "S") 0.1 A B C D
A A
2. PADS AND VIAS ARE CHASSIS GROUND 11 PLACES 3. THRU HOLES, PLATING OPTIONAL 4. HOLES DENOTED WITH 'A' ARE NOT REQUIRED WITH PICOLIGHT CAGES (6 PLACES) 5. ALL DIMENSIONS ARE IN MILLIMETERS
1
B
11.9 1
3.68
1.70
8.48
16.25
14.25 TYP
11.08
8.58
5.68
A A A A
B
9.60 4.80 1.70
11.93
2 TYP
2
2 10X
0.1
1.050.05 L AC
26.80
5 10 3 PLACES 41.30 42.30
9X 0.950.05 3 (MARKED "G") 0.1 L A C
THIS AREA DENOTES COMPONENT KEEP-OUT (TRACES ALLOWED)
Figure 4
Board layout
10X 5 10X 3.20
G G S G
2X 0.90
G
10.93 9.60 9X 0.8
G
10.53 9X 0.8
11.93
G
G
G
G
20X 0.500.03 0.06 C D
2X 1.550.05 0.1 L C D
20.05 TYP 0.06 L C D
Figure 5
Detail layout
ALL DIMENSIONS ARE IN MILLIMETERS
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
14
2.9 Front panel opening
B 16.25 0.10
A
10.40.1
C
C
0.40.1 15.250.10
1.7 0.9 3.5 0.3 7 16.15
All dimensions are in millimeters
Figure 6
2.10
Module outline
56.5 A A
13.7
13.7
SECTION A-A SCALE 4 : 1 12.3 8.5 1.0 2.25
2.0
2.0 MAX
45.0
9.2
34.6 2.5 41.8
All dimensions are in millimeters
Figure 7
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
15
2.11 Transceiver belly-to-belly mounting
6X .600.004 4X .640.004
6X .41.00
.135
.074
.042
All dimensions are in inches
Figure 8
.138
Section 3
Related Information
Other information related to the RoHS-Compliant 4.25 Gbps 850 nm eSFP Transceivers; Extended/Industrial Temperature and Voltage includes: * Section 3.1 Digital Diagnostic Monitoring and Serial ID Operation below * Section 3.2 Package and handling instructions on page 21 * Section 3.3 ESD Discharge (ESD) on page 21 * Section 3.4 Eye safety on page 21
3.1
Digital Diagnostic Monitoring and Serial ID Operation
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 is equipped with a two-wire serial EEPROM that is used to store specific information about the type/identification of the transceiver as well as real-time digitized information relating to the transceiver's performance. See the Small Form Factor Commitee's document number SFF-8472 Rev 9.5, dated June 1, 2004 for memory/address organization of the identification and digital diagnostic data. The enhanced digital diagnostics feature monitors five key transceiver parameters which are Internally Calibrated and should be read as absolute values and interpreted as follows;
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
16
Transceiver Temperature in degrees Celsius: Internally measured. Represented as a 16 bit signed two's complement value in increments of 1/256C from -40 to +125C with LSB equal to 1/256C. Accuracy is 3C over the specified operating temperature and voltage range. Vcc/Supply Voltage in Volts: Internally measured. Represented as a 16 bit unsigned integer with the voltage defined as the full 16-bit value (0-65535) with LSB equal to 100 V with a measurement range of 0 to +6.55V. Accuracy is 3% of nominal value over the specified operating temperature and voltage ranges. TX Bias Current in A: Represented as a 16 bit unsigned integer with current defined as the full 16 bit value(0-65535) with LSB equal to 2 A with a measurement range of 0 - 131 mA. Accuracy is 0.5 mA over the specified operating temperature and voltage ranges. TX Output Power in mW: Represented as a 16-bit unsigned integer with the power defined as the full 16-bit value (0-65535) with LSB equal to 0.1 W. Accuracy is 2 dB over the specified temperature and voltage ranges over the permitted range of 100 W to 800 W (-10 dBm to -1 dBm). Data is not valid when transmitter is disabled. RX Received Optical Power in mW: Represented as average power as a 16-bit unsigned integer with the power defined as the full 16-bit value (0-65535) with LSB equal to 0.1 W. Accuracy is 3 dB over the specified temperature and voltage ranges over the power range of 30 W to 1000 W (-15 dBm to 0 dBm).
Reading the data
The information is accessed through the MOD_DEF(1), and MOD_DEF(2) connector pins of the module. The specification for this EEPROM (ATMEL AT24CO1A family) contains all the timing and addressing information required for accessing the data. The device address used to read the Serial ID data is 1010000X(A0h) and the address to read the diagnostic data is 1010001X(A2h). Any other device addresses will be ignored. Refer to Table 4, Table 5, and Table 6 for information regarding addresses and data field descriptions MOD_DEF(0), pin 6 on the transceiver, is connected to Logic 0 (Ground) on the transceiver. MOD_DEF(1), pin 5 on the transceiver, is connected to the SCL pin of the EEPROM. MOD_DEF(2), pin 4 on the transceiver, is connected to the SDA pin of the EEPROM.
Decoding the data
The information stored in the EEPROM and the digital diagnostic information including organization is defined in the Small Form-Factor document SFF-8472 draft rev 9.5, dated June 1, 2004.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
17
Table 4 Data Field Descriptions
0
Address(1010000X)(A0h)
Serial ID Information; Defined by SFP MSA
0 55 95
Address(1010001X)(A2h)
Alarm and Warning Limits Reserved for External Calibration Constants Real-time Diagnostic Information JDSU-specific Information Nonvolatile, customerwriteable, field-writeable area
95
JDSU-specific Information
119 127
127
Reserved for SFP MSA
247 255 255
JDSU-specific Information
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
18
Table 5 Serial ID Data and Map
Memory Address Address (1010000X)(A0h) 0 1 2 3-10 11 12 13 14 15 16 17 18 19 20-35 36 37-39 40-55 56-59 60-61 62 63 64 65 66 67 68-83 84-91 92 93
Value
Comments
03 04 07 0000000120400C15 01 2A 00 00 00 0F 07 00 00 JDSU 00 000485
0352
00 3A 00 00
SFP Transceiver SFP with Serial ID LC Connector 850nm multimode, 100/200/400 FC, Intermediate Distance and 1000Base-SX 8B10B encoding mechanism Nominal Bit rate of 4Gbps Reserved Single mode fiber not supported Single mode fiber not supported 150 meters of 50/125 m fiber 70 meters of 62.5/125 m fiber Copper not supported Reserved Vendor Name (ASCII) Reserved IEEE Company ID (ASCII) Part Number (ASCII) Rev of part number (ASCII) Wavelength of laser in nm; 850 Reserved Check Code; Lower 8 bits of sum from byte 0 through 62 Reserved Rate Select, Tx_Disable, Tx Fault, Loss of Signal implemented
68 F8
94 95 96-127 128-255
02 64_94
Serial Number (ASCII) Date Code (ASCII) Digital diagnostics monitoring implemented, interally calibrated, receiver power type is average Alarms & Warnings, TX_Fault and Rx_LOS monitoring implemented, TX_Disable Control & Monitoring. Soft rate selectcontrol & monitoring implemented. SFF-8472 Rev 9.4 compliant Check Code; Lower 8 bits of sum from byte 64 through 94 JDSU specific EEPROM Reserved
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
19
Table 6 Diagnostics Data Map
Memory Address Address (1010001X)(A2h) 00-01 02-03 04-05 06-07 08-09 10-11 12-13 14-15 16-17 18-19 20-21 22-23 24-25 26-27 28-29 30-31 32-33 34-35 36-37 38-39 40-55 56-59 60-63 64-67 68-71 72-75 76-77 78-79 80-81 82-83 84-85 86-87 88-89 90-91 92-94 95 96 97 98 99 100
Value
Comments
Temp High Alarm Temp Low Alarm Temp High Warning Temp Low Warning Voltage High Alarm Voltage Low Alarm Voltage High Warning Voltage Low Warning Bias High Alarm Bias Low Alarm Bias High Warning Bias Low Warning TX Power High Alarm TX Power Low Alarm TX Power High Warning Tx Power Low Warning RX Power High Alarm RX Power Low Alarm RX Power High Warning RX Power Low Warning Reserved Rx_PWR(4) = 0 for internally calibrated Rx_PWR(3) = 0 for internally calibrated Rx_PWR(2) = 0 for internally calibrated Rx_PWR(1) = 0 for internally calibrated Rx_PWR(0) = 0 for internally calibrated Tx_I(Slope) = 1 for internally calibrated Tx_I(Offset) = 0 for internally calibrated Tx_PWR(Slope) = 1 for internally calibrated Tx_PWR(Offset) = 0 for internally calibrated T(Slope) = 1 for internally calibrated T(Offset) = 0 for internally calibrated V(Slope) = 1 for internally calibrated V(Offset) = 0 for internally calibrated Reserved Checksum Temperature MSB Temperature LSB Vcc MSB Vcc LSB TX Bias MSB
MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant External Calibration Constant Reserved Bytes 0_94 Internal temperature Internally measured supply voltage Internally measured TX bias current
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
20
Table 6 Diagnostics Data Map (continued)
Memory Address Address (1010001X)(A2h) 101 102 103 104 105 106 107 108 109 110 111 112-119 120-127 128-247 248-255
Value
Comments
TX Bias LSB TX Power MSB TX Power LSB RX Power MSB RX Power LSB Reserved MSB Reserved LSB Reserved MSB Reserved LSB Optional status/control bits Reserved Optional alarm & warning flag bits Vendor specific User/Customer EEPROM Vendor specific
Measured TX output power Measured RX input power For 1st future definition of digitized analog input For 2nd future definition of digitized analog input Refer to SFF-8472 rev 9.5 all features implemented Reserved Refer to SFF-8472 rev 9.5 all features implemented Vendor specific Field writeable EEPROM Vendor specific
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
21
3.2 Package and handling instructions
Process plug
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 is supplied with a dust cover. This plug protects the transceiver's optics during standard manufacturing processes by preventing contamination from air borne particles. It is recommended that the dust cover remain in the transceiver whenever an optical fiber connector is not inserted.
Recommended cleaning and de-greasing chemicals
JDSU recommends the use of methyl, isopropyl and isobutyl alcohols for cleaning. Do not use halogenated hydrocarbons (trichloroethane, ketones such as acetone, chloroform, ethyl acetate, MEK, methylene chloride, methylene dichloride, phenol, N-methylpyrolldone).
Flammability
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 housing is made of cast zinc and sheet metal.
3.3 ESD Discharge (ESD)
Handling
Normal ESD precautions are required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment utilizing standard grounded benches, floor mats, and wrist straps.
Test and operation
In most applications, the optical connector will protrude through the system chassis and be subjected to the same ESD environment as the system. Once properly installed in the system, this transceiver should meet and exceed common ESD testing practices and fulfill system ESD requirements. Typical of optical transceivers, this module's receiver contains a highly sensitive optical detector and amplifier which may become temporarily saturated during an ESD strike. This could result in a short burst of bit errors. Such an event might require that the application re-acquire synchronization at the higher layers (serializer/deserializer chip).
3.4 Eye safety
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 is an international Class 1 laser products per IEC 825, and per CDRH, 21 CFR 1040 Laser Safety Requirements. The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 is an eye safe device when operated within the limits of this specification. Operating this product in a manner inconsistent with intended usage and specification may result in hazardous radiation exposure.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS; EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
Caution
Tampering with this laser based product or operating this product outside the limits of this specification may be considered an act of "manufacturing," and will require, under law, recertification of the modified product with the U.S. Food and Drug Administration (21 CFR 1040).
Order Information
For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide, or via e-mail at customer.service@jdsu.com.
Sample: PLRXPL-VE-SG4-38
Part Number PLRXPL-VE-SG4-38 PLRXPL-VI-SG4-38 Temp. Range -20 to 85C -40 to 85C Power Supply Tolerance 10% 10% 1000Base-SX Compliant X X Rate Select X X Digital Diagnostics X X
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
Product specifications and descriptions in this document subject to change without notice. (c) 2008 JDS Uniphase Corporation 30149157 001 1108 PLRXPL-VE-SG4-38.DS.CMS.AE
November 2008

▲Up To Search▲

Price & Availability of PLRXPL-VE-SG4-38

	To Download PLRXPL-VE-SG4-38 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .